Alltruck Driver Training Sydney



TLILIC2016 Licence to drive a heavy rigid vehicle

Upgrade your licence today!

We are a RMS approved RTO and Sydney based provider of Heavy Vehicle Competency Based Assessment (HVCBA).
Heavy Vehicle Competency Based Assessment 

Licence Information

A heavy rigid licence allows drivers to drive any rigid vehicle with 3 or more axles and tow a trailer with a GVM up to 9 tonnes (and within GCM limits). Also includes an articulated bus.  Automatic/synchromesh and Unrestricted/Constant Mesh gearbox endorsements available


To enrol in the Heavy Rigid (HR) licence training course, all participants must:

  • Have held a Class C, LR or MR licence (not a learner) for periods totalling at least two years.
  • Complete the Roads and Maritime Service Rigid knowledge test and obtain a Heavy Vehicle Competency Based Assessment (HVCBA) learners guide and logbook

Course Duration

Drivers upgrading to the HR licence receive up to 9 or 11 hours (depending on the applicants choice of licence restriction) of training and assessment time, for the initial course fee. If additional time is required for an applicant to reach a competent standard, a discounted rate will apply.

Course Content

  • Pre-operational Check
  • Cabin Drill
  • Start, move off, shut down and secure 
  • Manages Steering 
  • Manages Gears (NA Automatic transmission)
  • Manages Brakes
  • Manages Accelerator
  • Create & Maintain Crash Avoidance Space
  • Protect Crash Avoidance Space
  • Road Rules and Directions
  • Reverse 
  • Hill Stop/Start 
  • Load Securing
  • Final competency assessment
  • Night Driving
  • Required Knowledge

Course Assessment

In addition to fulfilling the requirements specified in the TLI10 Transport and Logistics Training Package, our training and assessment systems satisfy the RMS requirements for Heavy Vehicle Competency Based Assessment (HVCBA)


Training starts at our Horsely Park premises (Next to Eastern Creek and Wetheril Park).

Course fee

Call us on (02) 9602 1177 or This e-mail address is being protected from spambots. You need JavaScript enabled to view it us anytime for our current fee schedule.


See here

RTO Details

RTO Code 70253 Driver Solutions PTY LTD Trading as ALLTRUCK DRIVER TRAINING


About Us

ALLTRUCK DRIVER TRAINING is a family owned and operated RMS approved Registered Training Organisation (RTO Code 70253) based in Sydney, NSW, specialising in heavy vehicle driver training and licence assessments.More

Connect with us

Follow us on:

Where to Find Us

View Larger Map
7A/4 Homepride Ave
Warwick Farm NSW 2170
You are here: Courses TLILIC2016 Licence to drive a heavy rigid vehicle